Motor rotation problem

[sam]

Hello Guys,

I've just completed my build. after caliberating i checked by starting the motors without props.
what i faced is all the 4 motors are rotating clockwise same direction.
please guide where is the problem and what to do now?

Final pic:

[RTRyder]

Did you solder the motor wires to the BL controllers in the same color sequence for all 4 motors? If you did, you need to swap two wires on each controller that needs to rotate in the opposite direction. For clockwise rotation the sequence is A=gray, B=blue, C=black, for counter clockwise it's Blue, Gray, Black, assuming you have the Roxxy motors, but that should work for any of the same set of motors, just swap the first two on the BL's that need to spin opposite.

Ken

[sam]

thanks bro,

I've reversed the two wires of roll motors.and got fine results.
it flys great!

regards