Using the Fat Shark Dominators with the Iftron FPV/POV live video systems.
These two products seem like they were made for each other.
After trying many many video goggles, these are the toughest and most
usable I have found. I have owed at least 10 different goggles in the past and these really work..
One very nice feature of the Fat Shark Dominator is the all in one Power/Video cable.
It allows you, not only to provide Audio/Video and Power to the Goggles it also makes powering the Iftron Receivers
very simple, all with only one battery.
This end goes into the Goggles. Providing Power and A/V
This end goes to the Iftron Receiver's Cable and the Battery.
To connect to the goggle just find the holes on the right side of the goggles.
Insert the Video cable into the phono style plug.
Then the power.
One Item not included with either kit is a Female RCA to Female RCA adapter, or through.
this is a situation that happens with many of these products. They just never know what or how
you will be connecting them. Thanks Radio Shack, you have an adapter for everything.(I'm sure you can find them
other places too)
This shows one with all three connections, but for our uses we really don't use the Audio connections, so you
really only need a single through adapter for the video. 'The Yellow Cable" If you are using Audio then you need all three. Easy to find at Radio Shack or other stereo/ electronics outlet.
See the part number?
Plug the adapter into the Red Yellow and White cables on the Fat Shark cable. Or just the yellow for
Video only applications.
The Iftron Receiver comes with this cable.
It then connects to the RCA adapter.
Plug the Phono style jack on the Iftron Cable into an Output of the Yellow Jacket Receiver.
You can then plug the power cord into the Iftron Receiver
Note the 6-15 volt input range.. the Fat Shark goggles will only work with 7.4 volts 2 Cell Lipo so keep that
in mind if you use a different lipo.
The Lipo that came with the Fat Sharks will work fine to power the Iftron Recievers.
but you can easily make your own cable to adapt to just about any 2 Cell Lipo.
Just get the same size plug and note the polarity labeled on the Iftron Receiver.
and add it to your Larger Lipo.
More mAh's - not voltage it must be a 7.4volt Lipo
just plug it into the other power connection on the Fat Shark Cable.
Now you can push the button on the Iftron Reciever and make sure it comes up on the channel Set on your
Transmitter. Default is channel 1
you then will also notice the goggles are powered up and receiving video noise if you don't have your transmitter turned on.
using the GoPro A/V cable you will get pristine video and great range with this setup.
For more info on the Iftron Yellow Jacket
See it in the shop and Click on the links to the manuals.
Also more info on the Fat Shark Domintors can be found here.
To power the Mondo Transmitters the MK Extension board makes a very clean 9 volt power source..