Now completly Soldered ready to go!!!
This is a Flight-Ctrl 2.1-ME kit for MikroKotpe..
New and Improved.
its taller and thicker.. you have the option of making it shorter if you li..
This is a power distribution printed circuit board for six BL-Ctrls. The use reduces the wiring e..
Frameset for the construction of MK HexaKopter. (this part is also included in the hexa-complete ..
Universal Landing Gear in size XL for the MikroKopter.
The 85g landing gear is extreme..
MK-USB: USB adapter kit for the MikroKopter (SMD preloaded)
This adapter converts USB to serial.
plus shipping This is a 14pol Brushless Outrunner High Torque for Direct Drive
LANC adapter cable
Sony-connector to Video-out & LANC
ACC Upgrade for FC2.1
ACC Upgrade sensor for Flight-Ctrl 2.1 ME.
With this small board a Flight-Ct..
Adapter for HiSight ActionCam
Adapter for MK HiSight ActionCam to use other cameras (eg GoPro..
Battery MS621F for MKGPS
Lithium Ionen (LiIon) rechachable battery as sparepart for MKGPS
New High Current BL
Brushless motor controller with fast response for the MikroKopter
This it ..
This tiny bare pcb can be used to solder the buzzer or extend the servo cable for the camera moun..
Cable set NaviCtrl
Cable set to connect the NaviCtrl to the FlightCtrl.
CArbon Fiber Version!
This Combi Centerplate can be used to build a Quadro, Y6, Hexa, H..
Cinch to 3pin Molex Apdater for simple connection of a video-source to the 5.8GHz Video tr..
IMPORTANT: Use FlightCtrl Firmware V2.02 (or greater), otherwise read the instructions in the wi..
Double Quadro V3 - Cool
8 ESCs on two boards (for Oktos) with heat sink! Extremely fast..
This is a small extension board (bare pcb + parts) which can be assembled with the fol..
This is an external compass for connection to the NaviCtrl.
This module is used w..
This cover made out of PCB-material is attached directly to the MKG..
This is the Big boy. Easily lift your DSLR!
Please read the explaination of the options for this ..
his is a hexa XL power distribution printed circuit board for six BL-Ctrls. The use reduces the w..
Frameset for the construction of MK HexaKopter XL. (this part is also included in the hexa-co..
Lipo connetion cable
LiPo cable with DEANS comp. connector
LiPo holder set
This is a set for a LiPo holder for mounting at the round CenterPlate (for exampl..
Lipo-Saver for 3 and 4-cell Lipos with simple connection to the balancer-connector
The Complete Stack Kit, Includes Flight controler and Navi Kit and MKUSB and Molex cable.
This the MiKroKopter Factory ARF.
"Really a super ARF kit, This arf is, take it out of the box, s..
NEW DESIGN - Black cover for use in MikroKopter (Okto or Hexa).
MK GPS V2.1(SMD preassembled)
This is an MKGPS receiver with u-blox LEA6S GPS module and a passiv..
MK Hexa XL Power Dist. Pre built.
Fully Pre populated with 6 BL's
This is a complete unit..
This is a kit to build a MK Hexa2 (with BL-Ctrl V2.0).
As a control board is a FlightCtrl ME in..
New stronger stiffer version.
'Universal part of a landing gear for the Mi..
MK HiSight "GoPro" ActionCam Mount
Small camera mount designed for action cameras like Sony A..
Universal camera mount for SLR cameras (like Canon EOS 550 and mechanical comp.) - already assemble..
MK HiSight SLR2
Universal camera mount for bigger SLR cameras (like Canon 5D Mark II and mechanic..
MK Okto XL Power Dist. Pre built. v8
Fully Pre populated with 8 2.1 BL's
This is a complete un..
MK Okto XL2 Kit
New in XL2 version:
Also with 2.2 Flight control board with the incredible new Z..
MK Okto XL2 Kit
This includes everything with the Okto XL2 kit, Plus latest GPS and Navi for Posi..
MK Okto XL2 Kit
This includes everything with the Okto XL2 kit, Plus latest GPS and Navi for ..
This (specially designed for the MikroKopter) black anodized ..
Molex video adapter
Adapter-pcb for 3pin Molexconnector
Motor angle adapter
With this adapter you can achieved a small tilt in mounting a motor.
This is a Navi-Ctrl kit with ARM9 microcontroller, micro-SD card socket and inte..
This includes a Pro license and expands the radius of the GPS waypoint.
Adds more Come home time ..
Navi-Ctrl V2.1 + ext. compass
This is a Navi-Ctrl kit with ARM9 microcontroller, micro-SD card sock..
Navigation Kit. 2.1 with External Compass.
This is an expansion set for GPS-based navigation for ..
8 ESCs on one board! Extremely fast brushless controller version V3 for our MikroKopter
Okto XL-Frame set w/ 1.5mm riggers
Frameset for the construction of MK OktoKopter XL. (this p..