Your shopping cart is empty!
Explanation Of ARF's and Options
ARF= Almost Ready to Fly
The Mikrokopter Factory ARF
is not the Same as Our Standard ARF,The Factory ARF is realy closer to Ready to Fly, the frame is completed and motors attached and all boards are installed. All you need to do on this sytem is install the landing gear, lipo holder and
radio. Please read the discription on this product to fully understand what is included.
The Navigation Option
This is for the purchase of the New 2.x Navi boards with a Kit. Usually a better price when purchased with a kit. Navi-Ctrl V2.0 ) andMK GPS V2.1
This is for the purchase of the New 2.x Navi boards with a Kit. Usually a better price when purchased with a kit. Navi-Ctrl V2.0 ) andMK GPS V2.1
This gives your MK, GPS Hold, Come Home, Way-points, Carefree mode, and more. The Navi-Ctrl v2.0 Pro 500 is for Mikrokopter/ Hisystems commercial licensing and allows the use of GPS way points out to 500 meter or 1000 meter radius. This also gives you 100 available waypoints vs only 32 on the standard board.
If you plan on using your MK for commercial purposes you need this license.
Mikrokopter.de or Hisystem's commercial license has nothing to do with your local laws and regulations. This is purely for thier Registration and Licensing.
Always check with your local laws and regulations regarding Commercial Use of RC aircraft.
If you select a Navi board you must select the GPS to get full functionality.
The Standard ARF
We will solder and test your Power Dist and BL's
Solder and test the Flight Controller. and if the Navi options are purchased we will set up your Navi and GPS boards.
Update firmware to latest Stable Rev's.
Set the Mixer settings to the appropriate model.
Solder the MKusb and test.
Solder the Lipo Connection Cable to the Power Dist Ring. Configure the Flight Controller for a Spektrum Receiver or for the Graupner Hott
Add anti prop-wash device to Altitude sensor
We will solder and test your Power Dist and BL's
Solder and test the Flight Controller. and if the Navi options are purchased we will set up your Navi and GPS boards.
Update firmware to latest Stable Rev's.
Set the Mixer settings to the appropriate model.
Solder the MKusb and test.
Solder the Lipo Connection Cable to the Power Dist Ring. Configure the Flight Controller for a Spektrum Receiver or for the Graupner Hott
Add anti prop-wash device to Altitude sensor
Lipo Options
We offer different options for your Lipo Battery specifically tailored to the kit you select
If you purchase two lipo's make sure they match,
Two lipo's in a parallel configuration is the best way to get the most current to the motors on the larger kits.
Further information on each lipo can be found under the shop descriptions
here.
Graupner Mx20 use this to add the Graupner Mx20 at a reduced kit price to your order.
Graupner MX20 Hott Setup and Configuration for MK's
This includes a memroy card and complete setup as Ziggy flies this radio. Including Latest firmware update and English voice files.
Powered By OpenCart
MiKroKopter.US Shop © 2013
View Mobile / Standard
MiKroKopter.US Shop © 2013