BL-Ctrl V1_2

BL-Ctrl V1_2
BL-Ctrl V1_2 BL-Ctrl V1_2
Brand: Mikrokopter
Product Code: BL-Ctrl_V1_2
Availability: Out Of Stock
Price: $58.25
Qty:  
   - OR -   

Fast brushless controller kit for our MikroKopter

Here it is a SMD-preassembled BL-Ctrl-kit for the MikroKopter.
) Discrete components (such as the capacitor itself must still be soldered.

The board is tested and programmed (including bootloader)

Features

  • Controller: AVR from Atmel ATMEGA8
  • Integrated current measurement for measuring the current flow and the used capacity on the Mikrokopters control
  • PCB: 4-ply(increased current measurement shunt)
  • Supply: 10-20V (3s + 4s)
  • Current limit on the Gleichtromseite
  • by high-performance MOSFETs 12A and 25A peak period are possible.
  • two LEDs (e.g., OK and Error)
  • Addressing the controller by jumper
  • various interfaces to the setpoint (I2C, PPM, serial)
  • Hole: 3mm
  • Dimensions (W x H): approx 44mm x 21mm

The kit

  •  SMD-preassembled board
  • The operation required Elko (low-ESR type) is included and must be soldered in itself.

Notes

  • This is a construction kit in which the SMD components already preloaded. Parts required for the operation must still be equipped themselves. (see delivery)
  • it should be recorded after the start the latest firmware
  • only for private, non-commercial use
  • The regulator must be protected from moisture

Links

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Powered By OpenCart
MiKroKopter.US Shop © 2014