The core of your XM-4 craft consists of high quality carbon fiber center plates and
comes complete with flight control adaptor plate. On strategic places rivnuts are
fitted for assisting easy pack down once you have build your full craft for transport
and travel. Industrial grade graphite fiber filled composite internal boom mounting
create a rock solid construction for your XM-4.

The core of your XM-6 craft consists of high quality carbon fiber center plates and comes
complete with flight control adaptor plate. On strategic places rivnuts are fitted for assisting
easy pack down once you have build your full craft for transport and travel. Industrial grade
graphite fiber filled composite internal boom mounting create a rock solid construction for your XM-6

The core of your XM-8 craft consists of high quality carbon fiber center plates and comes
complete with flight control adaptor plate. On strategic places rivnuts are fitted for assisting
easy pack down once you have build your full craft for transport and travel. Industrial grade
graphite fiber filled composite internal boom mounting create a rock solid construction for your XM-8.

This boomset consists of 310mm carbon fiber tubes with a high-end gloss finish and
allow for fitting up to 13″ props. The industrial grade composite engine mounts support
motors in the class AXi 2814/22 and are fitted with anodized aluminium mounting disks
for heat dissipation and cosmetic appeal.

Boom nacelles and engine mount boots as well as two extra orange engine mount sets are included in the kit.

This boomset consists of 355mm carbon fiber tubes with a high-end gloss finish and allow for fitting up to 14″ props.
The larger industrial grade composite engine mounts support motors in the class AXi 2820/18 and are fitted with anodized
aluminium mounting disks for heat dissipation and cosmetic appeal.

Boom nacelles and engine mount boots as well as two extra orange engine mount sets are included in the kit.

This boomset consists of 355mm carbon fiber tubes with a high-end gloss finish and
allow for fitting up to 13″ props. The industrial grade composite engine mounts support
motors in the class AXi 2814/22 and are fitted with anodized aluminium mounting disks
for heat dissipation and cosmetic appeal.

Boom nacelles and engine mount boots as well as two extra orange engine mount sets are included in the kit.

Booms 410mm and engine mounting XM-8

This boomset consists of 410mm carbon fiber tubes with a high-end gloss finish and allow
for fitting up to 12″ props. The industrial grade composite engine mounts support motors in t
he class AXi 2814/22 and are fitted with anodized aluminium mounting disks for heat dissipation and cosmetic appeal.

Boom nacelles and engine mount boots as well as two extra orange engine mount sets are included in the kit.

 

This boomset consists of 440mm carbon fiber tubes with a high-end gloss finish and
allow for fitting up to 13″ props. The industrial grade composite engine mounts support
motors in the class AXi 2814/22 and are fitted with anodized aluminium mounting disks
for heat dissipation and cosmetic appeal.

Boom nacelles and engine mount boots as well as two extra orange engine mount sets are included in the kit.

Quick release landing gear/gear rail assembly with advanced vibration dampening technology.
Dual battery mounting on rubber protectors with battery strap keepers.
The snap on/off twin skid sets further add to a quick pack down. New
streamlined design and cosmetic appeal with ground clearance of
210mm to fit camera mounts like the PH AV130.

Quick release extended landing gear/gear rail assembly with increased clearance (280mm)
for fitting camera mounts like the PH AV200 and offers the same advanced vibration dampening
technology as the standard landing gear. Dual battery mounting on rubber protectors with battery
strap keepers. The snap on/off twin skid sets further add to a quick pack down.
New streamlined design and cosmetic appeal.

XM Landing Gear Extended Retractable

Includes the XM Quick release Gear Rail.

The Droidworx Retractable Landing is a product of months of R&D, design and re-design to perfect this classy piece of engineering. Not only did it have to ensure strength and longevity, it also had to offer easy pack down features and match the over-all design outlook which has become a signature of the Droidworx range. This Retractable Landing gear offers clear unobstructed 360 view for your camera AND is super easy to pack down with quick release snap on/off “legs” and skids, supplementing the slide on/off camera gear rail assembly. The kit includes Boom Battery Mounting Plates for mounting your batteries onto the booms, it’s ground clearance is 285mm. The mechanism comes fully assembled – simply put the legs together and snap them on. The set can be retrofitted to fixed landing gear frames. It works in conjunction with the Droidworx Quick Release advanced Vibration Absorbing Gear Rail Assembly already supplied with the Fixed Landing Gear craft – so please note: You need the Gear Rail Assembly also (5404-0120) with your Retractable Landing Gear to provide for camera gimbal mounting. For AD/VM craft Upgrade Gear Rail/Landing Gear Assemblies (4706-0030) are available in the upgrade sections of these models to retrofit the Retracts.

Instead of the standard polycarbonate dome you can choose for the super
impact resistant high impact dome, vacuum molded from a thicker 2mm polycarbonate.
This dome also fits underneath your standard included XM/SkyJib Lite 5-spoke crash cage.

The all new 5-spoke crash cage consists of a fiberglass cage contruction
mounted on a impact absorbing aluminium ring. We furthermore include a
highly impact resistant polycarbonate dome for further protection against moist and dust.
You can use either or, or both – the dome fits underneath the crash cage.
Both the crash cage and the dome attach to your center section with quick release
mounting posts allowing easy access to your flight electronics.

The Complete Stack Kit, Includes Flight controler and Navi Kit and MKUSB and Molex cable.

Everything you need to build a Mikrokopter Stack.

	Flight-Ctrl V2.1 ME with ACC Upgrade (assembled)   Reward Points: 6	FC_2_2_ACC_UPGRADE
	Navigation Kit   Reward Points: 5	Navi_Kit_2.1
	MK USB   Reward Points: 0	MK-USB
	Molex Cable for MKGPS or FC   Reward Points: 0	molex_cable
	Vibration dampener M3x15   Reward Points: 0	Vibration dampener M3x15
	Nut M3 black (plastic)   Reward Points: 0	MUTTER_M3_schw

Flight-Ctrl V2.1 ME with ACC Upgrade (assembled)

This is a Flight-Ctrl 2.1-ME kit for MikroKotper including ACC Upgrade for a better altitude control. The ACC Upgrade is a small PCB that is already mounted on the FlightCtrl. All parts of the Flight control are already assembled - no soldering required.

FlightCtrl ME (overview):

• high-quality gyroscope (MEMS technology) from Analog Devices
• 5 servo outputs
• 2 switching regulator (like RECOM) are now included in the kit
• 1 pressure sensor MPX4115Ais now included
• Molex-connector for easier connection to the distribution boards
• extra voltage regulator for Spektrum satelite receiver
• easier use of Jeti or HoTT telemetry
• Servo and Lighting can be connected via pin header
• 4-layer PCB Design
• max. 4s supply

The FlightCtrl kit is tested and programmed (including the boot loader) .
A MKUSB is required for debugging or the parameterization.

Scope of delivery

• 1 Flight-Ctrl board with ACC Upgrade
• Other components: Buzzer

Hints

• The molex cable has to be ordered in the shop separately !
• You should always update to the latest available firmware version.
• Please mount the FlightCtrl ME vibration-free. You may use our M3x15 vibration damper for mounting...
• Only for private, non-commercial use
• Please note our software license before using.

Links

Navigation Kit.

This is an expansion set for GPS-based navigation for the MikroKopter
. The set consists of a Navi-Ctrl-board, a MKGPS with already mounted GPS Shield and micro-SD card for logging of flight data.


Using the navigation set the following functions are possible:

• Automatic waypoint flight (WP) with defined speeds and altitudes (up to 32 WPs)
• Automatic hold of position (Position Hold)
• Automatic Fly Back to the starting point (Coming Home)
• Automatic flight to Point Of Interests (POI)
• Automatically create panorama pictures (when using a camera)
• Automatic flight of POI / WP with simultaneous triggering of a connected camera
• determining the current position of the MikroKopter
• write log files to the SD card. The route can e.g. are displayed in Google Earth and analyzed in detail.

The pcbs come completely assembled and ready for use.

delivery

• 1 Navi-Ctrl
• 1 MK-GPS with mounted GPS-Shield
• 1 Micro SD card
• Other components: 10-pin & 6-pin cable set, GPS connection cable, mounting hardware

Notes

• GPS waypoint radius is max. 250m around the start point. ComingHome or PositionHold possible without range limit
• With a commercial license an expanded GPS waypoint radius and up to 100 waypoints are possible
• Please note
• the terms of the software with respect to commercial use

Links

• instructions in the wiki ...
• software license ...
•  

Molex cable for GPS or FC

5pin. Cable to connect MKGPS with NaviCtrl and a FlightControl 2.1 to a power distribution board

Saves much time on soldering and ease of removing FC from system.

not included in kits.

Length: approx 60 mm

DJI Wookong Multi-Rotor

stabilization controller is a complete flight system for all multi-rotor platforms for commercial and industrial AP applications. Unlike others, WooKong allows the use of regular ESC commonly used in RC helicopter without any wiring modification; Heli mode setup providing a seamless transition for current Ace One AP professionals. WK-M utilizes high quality components precisely calibrated with temperature compensation in all gyros and sensors, industry renounce flight algorithm in autopilot and UAV. IMU damping system is rated for gas engine best in the class.

Attitude mode maintains precise altitude hold for indoor flight while GPS mode provides superb position hold.

• All motor mixer supported (Common, Customized)
• Position & altitude hold
• Multiple Control Modes (GPS ATTI, ATTI, Manual)
• GPS ATTI mode gives you the ability of position hold including altitude self-leveling
• ATTI mode allows sports style flying and speed control determined by the pilot while maintaining altitude using on-board barometer
• Intelligent fail safe (Auto Hover, Auto Go Home)
• Firmware online upgradable
• Industrial/Commercial level components
• Features built-in include compass and gimbal control

Specs:

Multi Rotor Types: Quad-Rotor / Hex-Rotor / Octo-Rotor
Supported ESC output: 400Hz refresh frequencys
Recommended Transmitter: PCM or 2.4GHz with minimum 5 channels and Failsafe function available on all channels
Recommended Power Supply: DC 4.8 ~ 12V
Power Consumption: MAX 5W (0.9A@5V, 0.7A@5.8V,0.5A@7.4V,0.4A@8V)
Operating Temperature: -5°C to +60°C (You have to keep the IMU warm if you want to use it under low temperature, could be -5°Cor lower.)
Flight Performance (can be effect by mechanical performance)
Hovering Accuracy:
    Vertical: ± 0.5m
    Horizontal: ± 2m
Suitable Wind Condition: < 8m/s (17.7mph)
Max Rotate Angle: 35°
Vertical Speed: 6m/s
Packaging &Shapes

 

Quadro XL power distribution (assembled)

 

Delivery

• 1x distribution board (assembled with 4 BL-Ctrl)

MK Hexa XL Power Dist. Pre built.

Fully Pre populated with 6 BL's

This is a complete unit.

6 bl's Power dist board and molex connector,

completly soldered ready to go, Ready to ship.

Make your repairs and upgrades easier..

No waiting..

This is a limited supply offer.

Contains

1-Pre built and Populated Hexa xl power dist board Assembly

MK Okto XL Power Dist. Pre built. v8

Fully Pre populated with 8 2.1 BL's

This is a complete unit.

8 bl's Power dist board and molex connector,

completly soldered ready to go, Ready to ship.

Make your repairs and upgrades easier..

No waiting..

This is a limited supply offer.

Contains

1-Pre built and Populated Okto xl power dist board Assembly

Maytech Harrier Supreme MT30A-Opto-v1

Simply the best for Multi-rotor

MT30A-OPTO-V2

 

• ID 6922998104406
• Application RC Airplane and Helicopters
• Cont.Current 30A
• Lipo2-4Cells
• Burst Current(10sec) 40A
  NiMh 5-12Cells
• Net Weight 27g
  BEC N/A N/A
• PCB Size(mm)(L x W x H) 38.5x29x11
  Programe Device Transmitter/Programe Card

 

 

Maytech Harrier Supreme MT40A-Opto-v1

Simply the best for Multi-rotor

MT40A-OPTO-V1

 

• ID 6922998104406
• Application RC Airplane and Helicopters
• Cont.Current 40A
• Lipo2-4Cells
• Burst Current(10sec) 60A
  NiMh 5-12Cells
• Net Weight 27g
  BEC N/A N/A
• PCB Size(mm)(L x W x H) 38.5x29x11
  Programe Device Transmitter/Programe Card

 

Main Features:

• Use new generation of MOSFET to make sure the ESC low heating and more efficiency.
• Secondary submenu setting is easier to be programmed by Maytech LED card.
• Advance governor mode to keep motor speed even though the load is changed.
• More optional motor timing setup and soft acceleration start-ups make the motors run smoothly.
• Super smooth and accurate throttle linearity.
• Supports high RPM motors, can match with most of the motors in RC market.
• Power arming protection (prevents the motor from accidentally running when switched ON).
• Over-eat Protection:
• When the temperature of ESC exceeds 110 Degrees Celsius, the ESC will reduce the output power to allow it too cool.
• Lost Throttle Signal Protection:
• The ESC will automatically reduces output power to the motor when it detects throttle signal loss for 2 second, a subsequent loss of throttle signal beyond 2 seconds, will cause the ESC automatically to cut power to the motor.
• All functions are programmable, to meet your specific needs.

The MAYTECH ESC's high power BEC has been specifically designed for extreme aerobatics and therefore has the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns, and is also capable of supporting continuous simultaneous multiple servo operations typically found in CCPM equipped hardcore 3D E-helicopters.

 

Maytech Harrier Supreme MT35A-Opto-v1

Simply the best for Multi-rotor

MT35A-OPTO-V1

 

• ID 6922998104406
• Application RC Airplane and Helicopters
• Cont.Current 35A
• Lipo2-4Cells
• Burst Current(10sec) 50A
  NiMh 5-12Cells
• Net Weight 27g
  BEC N/A N/A
• PCB Size(mm)(L x W x H) 38.5x29x11
  Programe Device Transmitter/Programe Card

 

Main Features:

• Use new generation of MOSFET to make sure the ESC low heating and more efficiency.
• Secondary submenu setting is easier to be programmed by Maytech LED card.
• Advance governor mode to keep motor speed even though the load is changed.
• More optional motor timing setup and soft acceleration start-ups make the motors run smoothly.
• Super smooth and accurate throttle linearity.
• Supports high RPM motors, can match with most of the motors in RC market.
• Power arming protection (prevents the motor from accidentally running when switched ON).
• Over-eat Protection:
• When the temperature of ESC exceeds 110 Degrees Celsius, the ESC will reduce the output power to allow it too cool.
• Lost Throttle Signal Protection:
• The ESC will automatically reduces output power to the motor when it detects throttle signal loss for 2 second, a subsequent loss of throttle signal beyond 2 seconds, will cause the ESC automatically to cut power to the motor.
• All functions are programmable, to meet your specific needs.

The MAYTECH ESC's high power BEC has been specifically designed for extreme aerobatics and therefore has the capability to support the higher momentary peak demand loads to eliminate the possibility of unwanted shutdowns, and is also capable of supporting continuous simultaneous multiple servo operations typically found in CCPM equipped hardcore 3D E-helicopters.

 

Power distribution board 8

 

MK3638

plus shipping This is a 14pol Brushless Outrunner High Torque for Direct Drive


This (specially designed for the MikroKopter) black anodized engine has extra-long cables, short shaft (ideal for coaxial arrangement).
The MK3638 uses bigger ball bearings (compared to MK3538)

 

Technical Data

• Lithium cell count: 3-6
• Load current: max. 20A
• Maximum load current. (60 sec): 25 A
• No-load speed: 770 rpm / V
• Recommended Propeller Size: 10" .. 14"
• Machanical power: 350 W
• Thrust max.: 2200 g
• Wire length: about 52 cm
• Total weight (without cable): approx 100g
• Dimensions: h=35mm, d=38mm
• Shaft diameter: 4 mm

Delivery

• 1 Motor
• Accessories: propeller mount 5mm and attaching material

Axi 2814-22 Short Shaft Motor

 

Special edition Axi Engines. Reworked with short shaft and 600mm wiring for the Mikrokopter. These engines have been factory re-wound based on the Spec.

 

"These are absoultly the smoothest and most powerful motors we have tried to date."
"they work perfect with the Mikrokopter system no system changes needed."..Ziggy
These engines can be used as a replacement for the MK 3538. An excellent choice for the Heavy Lifting applications.

the motor mount holes and Prop mounts are the same as the MK3538 systems.
Does not Include prop mount or screws.

see related products for proper mounts.

High torque brushless motor AXI 2814/20 GOLD LINE with rotating drum and high power neodym magnets is suitable for light weight models of sailplanes up to 2000g and trainers to 1700 g in weight. Due to it's high torque this motor is capable of turning large propellers with a high level of efficiency and without the need for a gearbox. AXI 2814/16 GOLD LINE is suitable for for use with optional radial mount set. The optional radial mount set includes: mounting flange, propeller adaptor, securing collar, and screws.

Specification
No. of cells	3 - 4s Li-poly
RPM/V	840 RMP/V
Max. efficiency	83%
Max. efficiency current	8 - 17 A (>75%)
No load current / 10 V	0.7 A
Current capacity	25 A/20 s
Internal Resistance	145 mohm
Dimensions (diameter. x lenght)	35x37 mm
Shaft diameter	4 mm
Weight with cables	106 g

 

MK propeller mount with 5mm hub (M5 winding). (e.g. EPP or APC propeller )
Suitable for MK3538 3638 and AXI 2814 motors

Mounted is the propeller with a 5mm nut and a tooth washer (see pictures).


 

Delivery

• 1 propeller mount M5 and additional mounting material (see photo)

MK propeller mount with 6mm hub (M6 winding).
Suitable for MK3538, 3638 and AXI 2814 motors

Mounted is the propeller with a 6mm nut and a tooth washer (see pictures).

These work great on APC props..

 

Delivery

• 1 propeller mount M6 and additional mounting material (see photo)

AXI RMS2808

 

The AXi 2808 and 2814 radial mount set is compatible with the following AXi Gold Line motors: -

• AXi 2808/xx
• AXi 2814/xx

The radial prop adaptor included in this mount set has a 6mm shaft.

The radial mount set includes: mounting flange, propeller adaptor, securing collar and screws.

Also compatible with AXi 2814/22 heavy-lift motors.

Part number RMS2808.

CONTAINS:

Adaptor and hardware pictured.
 

Made in Czech Republic.

Xoar PJP-N 12x5 Pair

• Premium grade beech wood
• One year long R&D and world class craftsmanship
• Manual finish to perfect
• 2 layers of primer coating + 2 layers of glossy protection coating prevent corrosion
• Manually pre-balanced
• Pre-drilled
• QC qualified

Xoar Precision Pair is specially designed for direct-current-engine-powered model planes and multi-axial model helicopters. Each pair is produced with tight balance in terms of wood density, weight and dimension control to create responsive, stable performance platform 1 CW (clockwise) prop & 1 CCW (counterclockwise) prop Made of Quality Germen Beechwood, Plywood, or Carbon Fiber (Electric Motor Only*) in order to produce simultaneous rotation accurately. Only the best blades that are tested with great static, dynamic equilibrium are selected and packaged as Xoar's Precision Pair.

RPM up to 16000.

For Multicopter:
Mostly for Multicopter UAV application for electric motor 13 x 6.5 Carbon Fiber Precion Pair: produced with high-temp forming process, ultra light weight with stiffness. It is the solution for high end performance Multicopter UAV propulsion platform.

For Fixed wing application:
Place the Precision Pair at front of aircraft, one CCW and one CW. Available for both Gas and electric motor platform.

Delivery - On pair of Precision props.

6 mm boar.

Manufactures specs.

Xoar PJP-N 12x6 Pair

• Premium grade beech wood
• One year long R&D and world class craftsmanship
• Manual finish to perfect
• 2 layers of primer coating + 2 layers of glossy protection coating prevent corrosion
• Manually pre-balanced
• Pre-drilled
• QC qualified

Xoar Precision Pair is specially designed for direct-current-engine-powered model planes and multi-axial model helicopters. Each pair is produced with tight balance in terms of wood density, weight and dimension control to create responsive, stable performance platform 1 CW (clockwise) prop & 1 CCW (counterclockwise) prop Made of Quality Germen Beechwood, Plywood, or Carbon Fiber (Electric Motor Only*) in order to produce simultaneous rotation accurately. Only the best blades that are tested with great static, dynamic equilibrium are selected and packaged as Xoar's Precision Pair.

RPM up to 16000.

For Multicopter:
Mostly for Multicopter UAV application for electric motor 13 x 6.5 Carbon Fiber Precion Pair: produced with high-temp forming process, ultra light weight with stiffness. It is the solution for high end performance Multicopter UAV propulsion platform.

For Fixed wing application:
Place the Precision Pair at front of aircraft, one CCW and one CW. Available for both Gas and electric motor platform.

Delivery On pair of Precision props.

6 mm boar.

 

Manufactures specs.

Xoar PJN 13x5 Pair

• Premium grade beech wood
• One year long R&D and world class craftsmanship
• Manual finish to perfect
• 2 layers of primer coating + 2 layers of glossy protection coating prevent corrosion
• Manually pre-balanced
• Pre-drilled
• QC qualified

Xoar Precision Pair is specially designed for direct-current-engine-powered model planes and multi-axial model helicopters. Each pair is produced with tight balance in terms of wood density, weight and dimension control to create responsive, stable performance platform 1 CW (clockwise) prop & 1 CCW (counterclockwise) prop Made of Quality Germen Beechwood, Plywood, or Carbon Fiber (Electric Motor Only*) in order to produce simultaneous rotation accurately. Only the best blades that are tested with great static, dynamic equilibrium are selected and packaged as Xoar's Precision Pair.

RPM up to 16000.

For Multicopter:
Mostly for Multicopter UAV application for electric motor 13 x 6.5 Carbon Fiber Precion Pair: produced with high-temp forming process, ultra light weight with stiffness. It is the solution for high end performance Multicopter UAV propulsion platform.

For Fixed wing application:
Place the Precision Pair at front of aircraft, one CCW and one CW. Available for both Gas and electric motor platform.

Delivery-On pair of Precision props.

6 mm boar.

 

Manufactures specs.

Xoar PJP-N 13x6 Pair

• Premium grade beech wood
• One year long R&D and world class craftsmanship
• Manual finish to perfect
• 2 layers of primer coating + 2 layers of glossy protection coating prevent corrosion
• Manually pre-balanced
• Pre-drilled
• QC qualified

Xoar Precision Pair is specially designed for direct-current-engine-powered model planes and multi-axial model helicopters. Each pair is produced with tight balance in terms of wood density, weight and dimension control to create responsive, stable performance platform 1 CW (clockwise) prop & 1 CCW (counterclockwise) prop Made of Quality Germen Beechwood, Plywood, or Carbon Fiber (Electric Motor Only*) in order to produce simultaneous rotation accurately. Only the best blades that are tested with great static, dynamic equilibrium are selected and packaged as Xoar's Precision Pair.

RPM up to 16000.

For Multicopter:
Mostly for Multicopter UAV application for electric motor 13 x 6.5 Carbon Fiber Precion Pair: produced with high-temp forming process, ultra light weight with stiffness. It is the solution for high end performance Multicopter UAV propulsion platform.

For Fixed wing application:
Place the Precision Pair at front of aircraft, one CCW and one CW. Available for both Gas and electric motor platform.

Delivery On pair of Precision props.

6 mm boar.

 

Manufactures specs.

Xoar PJP-N 14x5 Pair

• Premium grade beech wood
• One year long R&D and world class craftsmanship
• Manual finish to perfect
• 2 layers of primer coating + 2 layers of glossy protection coating prevent corrosion
• Manually pre-balanced
• Pre-drilled
• QC qualified

Xoar Precision Pair is specially designed for direct-current-engine-powered model planes and multi-axial model helicopters. Each pair is produced with tight balance in terms of wood density, weight and dimension control to create responsive, stable performance platform 1 CW (clockwise) prop & 1 CCW (counterclockwise) prop Made of Quality Germen Beechwood, Plywood, or Carbon Fiber (Electric Motor Only*) in order to produce simultaneous rotation accurately. Only the best blades that are tested with great static, dynamic equilibrium are selected and packaged as Xoar's Precision Pair.

RPM up to 16000.

For Multicopter:
Mostly for Multicopter UAV application for electric motor 14 x 5 Carbon Fiber Precion Pair: produced with high-temp forming process, ultra light weight with stiffness. It is the solution for high end performance Multicopter UAV propulsion platform.

For Fixed wing application:
Place the Precision Pair at front of aircraft, one CCW and one CW. Available for both Gas and electric motor platform.

Delivery On pair of Precision props.

6 mm bore

 

Manufactures specs.

Xoar PJP-N 14x6 Pair

• Premium grade beech wood
• One year long R&D and world class craftsmanship
• Manual finish to perfect
• 2 layers of primer coating + 2 layers of glossy protection coating prevent corrosion
• Manually pre-balanced
• Pre-drilled
• QC qualified

Xoar Precision Pair is specially designed for direct-current-engine-powered model planes and multi-axial model helicopters. Each pair is produced with tight balance in terms of wood density, weight and dimension control to create responsive, stable performance platform 1 CW (clockwise) prop & 1 CCW (counterclockwise) prop Made of Quality Germen Beechwood, Plywood, or Carbon Fiber (Electric Motor Only*) in order to produce simultaneous rotation accurately. Only the best blades that are tested with great static, dynamic equilibrium are selected and packaged as Xoar's Precision Pair.

RPM up to 16000.

For Multicopter:
Mostly for Multicopter UAV application for electric motor 14 x 6.5 Carbon Fiber Precion Pair: produced with high-temp forming process, ultra light weight with stiffness. It is the solution for high end performance Multicopter UAV propulsion platform.

For Fixed wing application:
Place the Precision Pair at front of aircraft, one CCW and one CW. Available for both Gas and electric motor platform.

Delivery On pair of Precision props.

6 mm bore

 

Manufactures specs.

Light and stiff propeller made from CFK (handmade) Carbon Fiber.
Balanced and with polished surface

"You have to see these props to fully appreciate the Quality

..the Lightest smoothest prop I've seen."  -- Ziggy

Technical data

• Diameter: 12" (30,48cm)
• Slope: 3,8" (9,7cm)
• Bore: 5mm
• Weight: approx. 11g

Delivery

• 1 Propeller

Light and stiff propeller made from CFK (handmade)
Balanced and with polished surface

 

"What can I say? they are just a work of art"-- Ziggy

Technical data

• Diameter: 12" (30,48cm)
• Slope: 4,5" (11,4cm)
• Bore: 5mm
• Weight: approx. 11g

Delivery

• 1 Propeller

Light and stiff propeller made from CFK (handmade) Carbon Fiber.
Balanced and with polished surface

"You have to see these props to fully appreciate the Quality

..the Lightest smoothest prop I've seen."  -- Ziggy

Technical data

• Diameter: 12" (30,48cm)
• Slope: 4.2
• Bore: 5mm
• Weight: approx. 11g

Delivery

• 1 Propeller

Light and stiff propeller made from CFK (handmade) Carbon Fiber.
Balanced and with polished surface

"You have to see these props to fully appreciate the Quality

..the Lightest smoothest prop I've seen."  -- Ziggy

Technical data

• Diameter: 12" (30,48cm)
• Slope: 4.2
• Bore: 5mm
• Weight: approx. 11g

Delivery

• 1 Propeller

Propeller 12x3.8 CFK - left

 

Propeller 12x4.5 CFK - left

Light and stiff propeller made from CFK (handmade)
Balanced and with polished surface
 

"Just so pretty..I drool over these Props.."--Ziggy

Technical data

• Diameter: 12" (30,48cm)
• Slope: 4,5" (11,4cm)
• Bore: 5mm
• Weight: approx. 11g

Delivery

• 1 Propeller

Propeller 13x4.2 CFK - left

Light and stiff propeller made from CFK (handmade)
Balanced and with polished surface
 

"Just so pretty..I drool over these Props.."--Ziggy
Strong and take a beating..
 

Technical data

• Diameter: 12" (30,48cm)
• Slope: 4,5" (11,4cm)
• Bore: 5mm
• Weight: approx. 11g

Delivery

• 1 Propeller

Propeller 14x4.5 CFK - left

Light and stiff propeller made from CFK (handmade)
Balanced and with polished surface
 

"Just so pretty..I drool over these Props.."--Ziggy
Strong and take a beating..
 

Technical data

• Diameter: 12" (30,48cm)
• Slope: 4,5" (11,4cm)
• Bore: 5mm
• Weight: approx. 11g

Delivery

• 1 Propeller

 

 

Skyline Gyro RSGS

New Updated firmware and harness!!

 

 

Firmware  Servo Mod  Software  SetupGuide1.1

 

How to mount on AV200

 

360 Pan Kit for the Pro AV200 camera gimbal W/O landing gear.

This is an optional upgrade and can bolt on directly to the Pro AV200 camera gimbal. The kit is also supplied with an adaptor plate for the MK and Droidworx multi-rotor frames. (Weight 320 grams)

Camera Gimbals sold separately

Now in Stock!!!

Now come with GR-24

Micro SD memory card and usb interface cable.

Preloaded with English Voice files.

Same working specs as the German model.

These do not come with a Charger.

It is recomended to use your Lipo/Nimh charger to charge the battery outside the Radio.

Explanations of the Options available this Item.

Graupner MX-20 HoTT Transmitter

The MX-20 12-HoTT control functions enables the advanced RC modelers to control nearly all models. The use of Graupner HoTT 2.4 GHz transmission technology ensures high reliability through bi-directional communication between transmitter and receiver with integrated telemetry, voice output via the headphone output and ultra-fast response times.

Full Telemetry from the MK nothing extra needed!!!

Now offering Complete Settup and config for MK's

Option Comes with memery Card and complete setup to fly an MK. , of course you may want to customize some things to suit needs.
 

The MX-20 HoTT is an ideal RC-transmitter for the MikroKopter.

• 12 channels for switches and potentiometers
• modern 2.4 GHz transmission technology
• Bidirectional communication between the transmitter and receiver
• MikroKopter telemetry displayed on the illuminated 8 * 21 character LCD
• voice output of the telemetry values ​​
• 7 Switch (2 three-position switch, two 3-position switch and two push-buttons)
• 3 analog potentiometers
• DSC socket for connection of flight simulators (AeroSim) or Teacher- / Pupil systems
• About 200 systems can be used simultaneously
• future safe by the update capability via USB interface (hott update)
• five different menu languages: German, English, French, Italian and Spanish later via software update possible
• Different speech-files coming soon
• Wireless teacher / pupil function
• Free assignment of all switches
• 24 model memory
• Extremely fast re-binding, even at maximum distance
• voice output available via programmable switches
• more.

delivery

• Microcomputer-telemetry transmitters HoTT Graupner mx-20 transmitter with integral NiMH Battery 2000 mAh
• receiver Graupner HoTT GR-24
•  

More Info:

The mx-20 12-HoTT control functions enables the advanced RC modelers to control nearly all models. The use of Graupner HoTT 2.4 GHz transmission technology ensures high reliability through bi-directional communication between transmitter and receiver with integrated telemetry, voice output via the headphone output and ultra-fast response times.
The station has 24 model memories. Simplified programming programming technology with capacitive touch buttons. High-contrast, 8-line blue backlit graphic display ensures perfect display of all setting parameters and telemetry data. Storage of telemetry data and expansion of the model memory on a micro-SD memory card possible.
The channel signal is resolved with 12-bit in 4096, enabling an extremely sensitive control behavior.
USB port for reading and saving of model memories and for firmware upgrades.

• Micro-computer radio control system exploiting the latest 2.4 GHz technology Graupner HoTT
• Bi-directional communication between transmitter and receiver
• Wireless L / S function
• 5 different languages ​​(German, English, French, Italian and later Spanish) is possible via software update. Availability of appropriate language, see the download section.
• Storage of telemetry data with date and time
• Servo cycle time of 10ms selectable for digital servos.
• Ultra-fast response times by direct transfer of data from the main processor to 2.4 GHz transceiver with reliable transmission. No additional delays caused by detours on one processor module.
• Short antenna, retractable
• Operation and programming based on the proven concepts of the mx-24
• A high-contrast blue illuminated graphic display ensures perfect control of the parameters like model type, model memory, timers and battery voltage.
• 12 Control Functions
• Free assignment of all switches
• 24 model memory
• 7 switches / buttons, including 2 three-position switch, two 3-position switch, 2 buttons, 3 analogue plate already installed
• Mode 1-4 selectable
• CAP-touch control panel with key lock function prevents accidental operation.
• CAP-Touch display change from the main menu to the telemetry main menu with ESC.
• Many telemetry display, programming and analysis functions directly in the transmitter display
• Voice output available via programmable switches
• Extensive programs for surface and helicopter models
• Taumelscheibenbegrenzer
• Switch "monitor" to check all the switches and control switches
• 12 mixers, programmable for area and model helicopters, with freely selectable input and output functions, 4 curve mixers 5-point curve technology in 1% steps, easy to set and adjust curve values ​​for max. 5 points for throttle, collective pitch, tail rotor or other non-linear ways. The computer calculates the CPU with an ingenious polynomial approximation ideally rounded MPC (multi-point curve) mixer curve.
• 7 stages of flight programs can be customized for each model and name, the switching time is programmed separately.
• SUPER SERVO menu provides a sophisticated overview of all servo adjustment and correction for 4 simple parameters (direction of rotation, center position, separately for each side separately for each side and servo travel limit for 12 servos with a total of 72 set)
• SUPER DUAL-RATE, EXPO and EXPO-/DUAL-RATE-Menü with 36 set-up variations for three servo functions and six phases of flight.
• Practice optimized multi-function menus for fixed-wing and helicopter models. Entering the number of aileron and flap servos automatically programs all the appropriate mixer functions in the multi-functional wing menu. Aileron differential mixer, butterfly mixer, dual-flap mixer, Automatic gyro set function and other special functions
• Helicopter swashplate mixer for 1 -, 2 -, 3 - or 4-point linkage.
• Fail-safe monitor for 12 power functions
• Convenient Clock menu. Stopwatch system, alarm timer, countdown timer, lap counter, etc. 2 and 1 lap time displayed.
• Stopwatch with history: In addition to the lap counter, there is a one time, which captures and records a time 2 turn-ON and OFF times separately.
• Transmitter operating timer is determined by the battery charging process of the transmitter is automatically set to zero.
• Switch assignment of flight phase switch: Now 6 switches, 2 with priority feature. The name of each switch combination can be selected. This limits the number of flight phases of the number of flight phase switches.
• Linearization swashplate: Electronic compensation of the nonlinear path of rotary swashplate servos.
• Normal tail type, V-tail, delta / Nurfl., 2 HR Sv 3 +8 (so are immediately two elevator servos linked to each other without use of free mixers / Cross mixers available)
• Number of valves to 4 QR / WK 4: Full support of eight wing-mounted servos, now without use of free mixers.
• Switchable flight phase-shift-delay: For individual channels flight phase, the delay time off (for example, enable for engine-off in electric models, or lock / disable Heli).
• 16 phase names.
• Wing mixer: New design multi-flap menu for simple adjustments of up to 8 flight-phase specific surface free servos in a clear manner without using mixer.
• Number of flight phases: (Area: 7, Heli: 6 + AR)
• Phase trim
• Swapping the power allocation at the receiver output transmitter side and receiver side

The set includes:

Microcomputer-telemetry transmitters HoTT Graupner mx-20 transmitter with integral NiMH Battery 2000 mAh Graupner HoTT GR-24 receiver, transmitter charger 200 mA

HoTT General Features:

• Simple and extremely fast binding
• Range test and warning function
• Undervoltage warning
• Extremely wide receiver-operating-voltage range of 3.6 V to 8.4 V (functional to 2.5 V)
• Failsafe, free channel allocation (channel mapping), mixing functions and all servo settings are easily programmable with the HoTT-Smartbox
• Binding of any number of receivers for channel extension (max. 32 channels)
• Up to four servos can be in blocks with a power-cycle time of 10 ms triggered simultaneously (Digital servos!)
• Maximum immunity to interference due to optimized frequency hopping and spread wide channel
• Intelligent data transfer with correction function
• Extremely fast rebinding, even at maximum distance
• Telemetry analysis in real time
• Over 200 systems can be used simultaneously
• Future with the update capability via USB interface

 

NEW:

Safety:

FHSS, Frequency Hopping for up to 75 channels

Maximum immunity to interference due to optimized frequency hopping, spread wide channel antenna and diversification

Intelligent data transfer with correction function

Extremely high range

Range test and warning function

Undervoltage warning

Extremely wide receiver-operating-voltage range of 3.6 V to 8.4 V (functional to 2.5 V)

Many fail-safe functions

Keylog-function against interference from menus


Precision:

12-bit A / D converter 4096 for an extremely (extremely) high resolution signal

Shorter response times can be set (10 ms time period)

No additional delays due to modular processors. The hopping tal management is directly carried out by the 32-bit main processor.

Synchronous servo drive with simultaneous control of the servo outputs in blocks of 4 possible


Pilot Feeling:

Largely lag-free control reactions by direct processing

Telemetry analysis in real time

Language edition of the watches, warnings and telemetry data through headphone output

Repeat Play and Continue feature the voice of assignable switches programmable

To be issued pre-selection of language issues

Separately adjustable volume for beeps and voice output

Integrated telemetry with 8 x 21 character display or 128 x 64 pixels, either in text or graphic form

Duration of the backlight: ALWAYS, 30s, .60 s, 90s, 120s

Micro-SD card slot for storage of telemetry data similar to a black box and to extend the memory model

PC software for analysis or display of telemetry data by download

Sum signal at the receiver output for the highest L / S function, Satelittenempfänger, simulators, pedal-free stabilization systems, etc. programmable

Model memory-dependent binding, except for storing copied model

Wireless Lehrer-/Schülerfunktion

Wireless Model copy function of storing between two stations

Numerous phases of flight programmable

Taumelscheibenbegrenzer

Engine stop function

Numerous surface model and Helim


Other features:

Simple and extremely fast binding

Free channel allocation (channel mapping), transmitter and receiver mixer functions and all servo settings easily programmable

Binding of any number of receivers for channel extension (max. 16 channels). The last bound receiver sends the telemetry data.

Future with the update capability via USB interface

 

Links

• Matching pult
• link to manufacturer ...
• instrucktions in the wiki ...
• English Manual
• When configured here is the switch layout

Jeti DC-16 Mode 2

One of the attractive features of the Duplex 2.4GHz line of products is it's full integration with all Duplex telemetry sensors. You can easily observe up to 40 different parameters in real-time directly on the transmitter. Or, by using the JetiBox Profi (sold separately) you can see your data in parallel mode giving you and your copilot valuable real-time information (see video).

One of the most important features of Jeti's transmitters is the gimbal and switch function assignment flexibility. With the DC/DS-16 you are free to fully customize your radio. You can swap switches or sticks (Mode 1-4) and the on-board computer will recognize your changes and assign functions anywhere you like. Other important functions are programmable Sounds/Alarms and even user-recordable sounds. This audible alarm feature was specifically designed to keep you informed while also keeping distractions to a minimum. We think this is the best way enhance both your enjoyment and your model safety. You can simply set a receiver battery capacity alarm for the desired capacity used and once that number is reached the system acoustically and visually gives you warnings

Specifications and Features

• State-of-the-art, upgradable firmware which gives you full freedom and complete control.
• Solid aluminum, CNC cut transmitter case with fully integrated antenna and oversized LCD display.
• Mini USB port for firmware upgrades and PC download of telemetry data.
• Integrated speaker and 3.5mm headset jack. You can play back music and create custom voice alarms. Options are virtually unlimited.
• Built-in, logical switches that lets you program a complex string of control events with the simple flip of a switch.
• 9-point, programmable curve mixes for all 16 digital proportional channels.
• You can set up not just dual, but triple rates.
• Pre-programmed servo setups for nearly every type of wing, tail and swash plate imaginable.
• Unlimited use of the on-board 2GB SD card memory.
• Fully integrated logical switch functions. If you need to drop bombs only if your throttle is at 50% and bay doors are open, with this system you can. Your programming/mixing options are virtually unlimited.
• Fully integrated digital telemetry. View, process and store all your telemetry data and even wirelessly program any of the Duplex EX sensors.
• Create, manage and program all alarms. Enhance safety for both yourself and your model. Monitor your temperature, speed, battery voltage, receiver battery capacity and much more.
• All switches and channels are completely moveable and assignable. Want to move throttle to the right slider or switch several functions to just one stick? With the Jeti radio system, yes you can. Basically, you can program any stick, dial, switch or slider to generate any output you choose.
• Unlimited number of programmable timers. You can easily set a timer for your overall flight time, a model memory timer for the motor run of a specific model, and any number of count down/stopwatch timers that can be activated any number of ways.

Included:
(1) Jeti Duplex DC-16 Transmitter
(1) Jeti Transmitter Aluminum Case
(1) 110-240V Wall Power Supply
(1) Tx Battery Li-poly 3200mAh 3.7V (1S2P)
(1) Mini USB to USB PC Cable
    No reciever.  

 

• Instruction in the Wiki
•  

Jeti DS-16 Mode 5

Special Version for MikroKopter

Mode 5 = Both sticks (also the gas-stick) with spring!

The transmitters DC16 and DS-16 came to existence under cooperation of professional pilots and world champions.
They have been developed with the aim of maximum utility, simple handling as well as maximum durability and reliability of mechanical parts. The metal case provides maximum protection of the interior as well as of the outside surfaces against chemicals and the straightforward shapes make servicing easy.
Metal quad ball raced stick units with magnetic Hall sensors confirm the revolutionary design concept of this mostly strained element of a RC-System.

A backlit LCD display placed on the top side of the transmitter offers perfect legibility at any lighting condition and a large surveillance angle. Thanks to the high display resolution and application of a relatively big ammount of graphic images it was possible to create a simple and intuitive setting procedure, especially for displaying telemetric data.

The DUPLEX EX product family has been equipped with an improved telemetric data transfer system and the subsequent data processing on the LCD transmitter display or analysis on a PC. The transmitter allows setup of acoustical notifications ande speech for the MikroKopter.

The MikroKopter supports the telemetry transmitter in the current firmware.
 

delivery

• Transmitter DS-16 mode 5 (All sticks with spring!)
• charger for transmitter battery
• aluminum carrying case
• USB cable

Does not include the RMK5

Links

• Instruction in the Wiki

HYPERION EOS 0720I SUPER DUO 7S 16N CHARGER - DUAL 20A/500W 14S SYNC MODE

1000 watts of charging power! 

Hyperion EOS 0720i SUPER DUO3 7S 16N CHARGER, 11-29v DC Input, with Integrated balancers, TCS & STORE MODE- DUAL 20A/500W max Outputs with max 14S SYNC MODE.  

Sync your Packs easily..

this charger has more Featurs than any on the market!!

Compatible with the

NEW!  EOS CONTROL & DATA SUITE (ECDS) for Windows PC
(released SEPT 23 2010)

Please be sure to read the ECDS manual, especially the Quick Start Guide

This version ECDS requires EOS firmware version 5.0 or higher. Visit the EOS Firmware Update Page

ECDS Enables:
* Full Control of the Charger Via PC
* Editing/Storage/Uploading of Memory Positions to/from Charger
* Rich Data Logging features
* "Tagging" of packs for long-term analysis
* Customizable Alarms
* And more.....

 

 

Manual and Specs

 

Video

HYPERION EOS 730I NET3 7S 16N CHARGER - 30A/550W MAX Output.

 

NEW!  EOS 0720i NET3-AD (ac/dc) Just released June 10th 2010, the new EOS AC/DC is a major power advance for convenient charging at home or at the field. EOS 0720i NET3 AD (ac/dc input) 10.5V~29V DC  (20A, 150W max charge) 100V~240V AC (20A, 90W max charge) SYNC Charge up to 2x7S for max 14S Flightpacks at 300W max. See explanation of SYNC MODE charging below. * 12-Bit Balance Circuit Resolution for superb accuracy * Built-In USB DataPort and supplied USB cable * Hardware support for EOS Control & Data Suite PC Software * 20 Memory slots for batteries * CYCLE mode for LiFePO4 and LiPo * Convenient DC Cord Storage on charger bottom (see pics left) * HP/PQ and JST XH balance adapters included (+JST EH for EU) The NET3-AD is the most powerful AC/DC charger available today.  With AC input, it can charge a 5000mAh 2S car pack at more than 2C (~11.5A) and on DC nearly 4C (~19A).  Or on AC a 3S 2100mAh pack at can hit almost 4C, and on DC input up to 6C!   NEW!  EOS 0720i NET3-AD (ac/dc) Just released June 10th 2010, the new EOS AC/DC is a major power advance for convenient charging at home or at the field. EOS 0720i NET3 AD (ac/dc input) 10.5V~29V DC  (20A, 150W max charge) 100V~240V AC (20A, 90W max charge) SYNC Charge up to 2x7S for max 14S Flightpacks at 300W max. See explanation of SYNC MODE charging below. * 12-Bit Balance Circuit Resolution for superb accuracy * Built-In USB DataPort and supplied USB cable * Hardware support for EOS Control & Data Suite PC Software * 20 Memory slots for batteries * CYCLE mode for LiFePO4 and LiPo * Convenient DC Cord Storage on charger bottom (see pics left) * HP/PQ and JST XH balance adapters included (+JST EH for EU) The NET3-AD is the most powerful AC/DC charger available today.  With AC input, it can charge a 5000mAh 2S car pack at more than 2C (~11.5A) and on DC nearly 4C (~19A).  Or on AC a 3S 2100mAh pack at can hit almost 4C, and on DC input up to 6C! Note:  Versions are offered for Japan, USA, and EU markets, with appropriate AC power cables. EU version also adds EH adapters and has a higher retail price.  (the US version charger set is pictured here)   Note:  Versions are offered for Japan, USA, and EU markets, with appropriate AC power cables. EU version also adds EH adapters and has a higher retail price.  (the US version charger set is pictured here)

Lipo connetion cable

LiPo cable with DEANS comp. connector
 

Technical data

• cable thickness: 2.5qmm
• length: about 24cm

delivery

• 1 piece

 

 

HYPERION G3 CX 5000 MAH 4S 14.8V 25C/45C LIPOLY PACK

"These work great on the  XL's due to the 25C Rating".. 2 in parallel gives you 10,000 mAh's

 

The Thunder Power RC Exclusive G6 Chemistry Difference

All G6 Pro Lite 25C Series LiPo batteries pack a 25C continuous discharge rate, and a 50C burst discharge rate.

Generation 6 (G6) chemistry delivers the lightest, most powerful, longest lasting and fastest charge rate capable LiPo batteries yet. G6 series batteries offer the highest energy and power density in high-discharge rate capable LiPo technology, weighing less and delivering up to 60% more power than previous versions and 100% more cycle life than recent generation LiPo batteries.

That means more power at less weight for up to an incredible 600+ cycles while also being capable of technology-leading charge rates up to 5C* for quicker charge times. This industry-leading performance and capability comes as a result of building G6 cells using the latest in high-quality Japanese-made materials with advanced technologies and optimized compositions not found in other cells.

These technologies and materials, combined with the refined Premium Stack Technology (PST) construction, results in the lowest possible internal resistance (IR) and operating temps for maximum cycle life and the lowest cost per cycle.

Independent testers, sport and competition pilots alike proved they offered more reliability and power per weight than any other batteries in their class while delivering just as much power on the 300th+ cycle as they did on the 1st. And while others are only now scratching the surface of these performance levels, Thunder Power RC is proud to take those industry-leading standards to a whole new level by offering the next pinnacle in performance, longevity and charge rate capability with all-new G6 Pro Lite 25C series batteries.

Available in capacities from 125mAh to 7800mAh and in configurations from 1S 3.7V to 10S 37.07V, there’s a G6 Pro Lite 25C Series battery available for just about any application and at prices lower than the G4 Pro Power 30C batteries they replace. Best of all, Thunder Power RC batteries are backed by an industry-leading full 2-year warranty and 50% off damage replacement program coverage AND ARE STILL PROUDLY ASSEMBLED AND SUPPORTED IN THE USA!

Specifications for Thunder Power RC TP-5000-4SPL2 LiPo:

• Voltage: 14.8V
• Cells: 4-Cell
• Capacity: 5000mAh
• Max Continuous Discharge: 25C
• Max Burst Discharge: 50C
• Max Continuous Current: 100A
• Max Burst Current: 250A
• Max Charge Rate: 5C
• Max Charge Current: 25A
• Weight: 473g
• Dimensions: 37 x 43 x 136mm

Get More Info: View the Technical Information for Thunder Power RC Pro Lite V2 5000mAh 14.8V 4 Cell LiPolymer 4s 5000

 Dean's Ultra 2P Battery Module (Red)

Look!!! No Wires!!!

Use 2 Lipo packs in parallel to increase current and durations.

One female connection to two Male in Parallel

Made with Genuine Deans Ultra Connectors.

Engineered to handle the same high Current as the Deans Ultra Connectors are known for..

Allway check for Genuine Dean's connectors do not accept imatations.

The picture shows multilple versions.. this one is Red with One Femal connection to two male Connections.

One unit.

Engine mount kit 40 XM