MK Okto2 26

This is a kit to build a MK Okto2.

Explanations of the Options available for each kit

This Kit comes with the  FlightCtrl ME V2.1 .

This Kit Includes the new High Current BL-Ctrl's V2.0  "make sure to ask if you see a lower price someplace else, if it does not include the 2.0's it is not an Okto2."

This Kit  includes a 5000mAh 4 cell Lipo.

Please note, that the length of the riggers are different, so that the shape of the MK Okto2 is a square. (about 60cm without propellers).

This is a kit to build a MK Okto2 with HiLander-26, LiPo-Holder and motor angle adapter.
As a control board is a FlightCtrl ME V2.1 in the set.

Please note, that the length of the riggers are different, so that the shape of the MK Okto2 is a square. (about 60cm without propellers).

Powerful engine - combination: 5000mAh LiPo (4s), 10" propellers and 2827-35 Motor
With this set, more payload can be transported.


Besides the standard components, the necessary parts such as cables, shrink tubing, etc. are also included

Thus, the building is almost 'out of the box' possible.
Through the use of Roxxy engines in this set the MikroKopter is quiet and has low vibriations.
IMPORTANT: No receiver is included. Please order desired receiver separately!
Delivered products may differ from the picture - note the delivery!
The photo below shows the MK-Okto2 fully assembled (camera and camera mount not included)

 

Box / Kit Contents

• 1x preassembled FlightCtrl ME V2.1 (incl. altitude sensor)
• 8x preassembled BL-Ctrl V2.0
• 1x- Okto Power Distribution PCB
• 1x MKUSB
• 1x Okto2 Frame Set with anodized (coloured) riggers
• 4x HiLander-26
• 1x LiPo Holder
• Motor angle adapter
• 1x Transparent cap (can be painted from the inside)
• 1x Lipo 5000mAh/4s (FLAT version)
• 8x pairs EPP1045 propeller
• 8x Roxxy 2827-35 - black Brushless Motors
• 1x connection cable for receiver
• 1x extensive set of cables
• 4x vibration dampers M3x15
• Heat shrink tubing for other solder joints
• 2 pieces of Velcro stripes to fasten the Lipo
• 4 pcs Flex LED Tape for lighting
• 100 cable ties (black)

What is missing?

• IMPORTANT: No receiver is included. Please order desired receiver separately!
• Transmitter
• receiver crystal (only for 35Mhz or 40MHz receivers)
• Lipo Charger (for example Ultramat 14 & Deans charging cable)
• Schrauben-Sicherungslack
• Please note the terms of the software with respect to commercial use

Useful extension

• A few extra spare propellers
• Min. 1 Spare Lipo

Explanations of the Options available for each kit

• Navigation option: NaviCtrl, MKGPS, MK3Mag

Links

• Assebling instructions in the wiki ...
• Larger photo
• View software license

Write a review